Re: Any information on older safe locks
MartinHewitt wrote:I think I don't understand your description of what's happening.
They look like you could separate them they look uneven instead of being level to the wheel they are not on all 3 wheels.
MartinHewitt wrote:I think I don't understand your description of what's happening.
MartinHewitt wrote:I would like to point out, that your nut is halve turned. It should be like in your very first photo of this thread.
MartinHewitt wrote:Then your key is probably not the right key.
MartinHewitt wrote:There are change keys where this "flag" is on the edge and others were it is on the flat side.
Sometimes there are change keys on ebay: https://www.ebay.com/itm/173528570408
Another option is to make one yourself. You could make it from square stock or from round stock and grind it to a square where needed. The "flag" can be soldered or a threaded pin can be screwed in. I have seen the second option on newer Kromer change keys. If the lock is not in a safe it is also good enough without flag.
Return to Safes, Strongboxes & Combination Locks
Users browsing this forum: DotNetDotCom.org [Bot]