Help with a Mosler 4216CL5
Step 1
Turn the dial counterclockwise four times, until you reach 25
Step 2
Turn the dial clockwise three times, until you reach 88
Step 3
Turn the dial counterclockwise two times, until you reach 62
Step 4
Turn the dial clockwise and pause briefly at 9, then resume turning until it stops. The locking bolt retracts, opening the lock.
Step 5
Pull open the door of the safe. You may have to turn the handle counterclockwise before you can open the door.
4L 3R 2L R slowly till
the lock bolt retracts and the dial stops.
Well at least the safe is open so I can practice this opening without accidentally locking myself out.
Problem is I can't make the combination work no matter what I do. It refuses to unlock.
This is what I have doe so far.
Tried the combination front to back and back to front turning it every way possible and no luck. Decided to "Go in and see what is going on. The door cover is held with like 16 slotted screws around the inner door cover. In the area directly centered and opposite the dial. is 2 or so inch diameter round chrome cover looking thing attached to the lock body with 2 slotted screws. I have photographed the lock and tried to figure out what lock it is by looking all over the net for a similar lock, However So far I have not found any matches. I am hoping to identify the lock so I can learn about it and see if I am even trying to open the lock correctly and if not see why it doesn't open. There are 3 wheels attached to the back of the round chrome cover and you just take the 2 screws out and the cover and the attached wheel set comes away from a round hole in the lock body. I have very carefully dissembled the wheel set making sure every shim spring washer and gear are removed in order and replaced "Exactly" as they were. I checked the 3 wheels and confirmed the numbers I have matched each wheel with the exception of the last digit I think 9 it was. I was thinking the one wheel still in the lock body is probably the last digit. It would be nice to know if I am looking at the right stuff or not. I found nothing obvious going on with the wheels. They rotate with slight resistance which seems normal. No dirt or contamination. I did not clean or re lube anything as I heard that could really mess things up. So if anyone can help me out by telling me what I have would be an awesome start for me. The pic names are self explanatory so if you have any ideas as to whats next I am all ears. Thank you for your time.
So I am going to attach some photos if I can and maybe someone will recognize this lock and tell me the model or even how to get it to work.