I've been (somewhat) busy w/Medeco

[ChemicalRobot]

I've been focusing on my Medeco cylinders lately. I have a bunch but so far these four are the only ones I've picked (recently, at least). I've been trying to do it without a groove grabber, and instead I did the rotations for these with a SouthOrd slimline hook. My hands are tired!

Also, any tips on picking the interchangeable core to the control line?

DSC00139.JPG

[Farmerfreak]

Also, any tips on picking the interchangeable core to the control line?

Pick the middle two spaces two depths shallower. Pick the other four the same as you did there.

Edit: It should pick clockwise to get the core out.

[ToolyMcgee]

Put on your 3D goggles and you can see it.


I had to FF. I might not get an opportunity like that again!

[ChemicalRobot]

Awesome. Thanks for the pointers. It worked! I had to go CCW though.

removed.jpg

[the lockpickkid]

Great job on that, can't believe it was so easy for you!!

[bezza1]

nice chemical now all you need to do is make a control key.

[ChemicalRobot]

Great job on that, can't believe it was so easy for you!!

Well on that i-core it was easy to get to the shear line because I had the pins already rotated from the previous picking attempt.

nice chemical now all you need to do is make a control key.

That would be cool! But it's a bit over my skill level, haha.