FAQ  •  My feedback  •  Feedback
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Mul-t-lock 7 pin padlock.

<<

jonnyboy091373

User avatar

Familiar Face

Posts: 80

Joined: Sat May 09, 2009 6:52 am

Location: Bangor, Maine

Post Wed Jul 14, 2010 7:35 pm

Mul-t-lock 7 pin padlock.

Got this fine lock off of ebay the other day, and was able to get it on my break from work.
If anyone has any info on taking it apart that would be helpful. I think it has something to do with pushing a pin in.
I used a peterson gem to open this lock. I would let the back edge of the pick sit up against the warding and just rotate as needed.
thanks for looking.
You do not have the required permissions to view the files attached to this post.
<<

bouncer965

User avatar

Active Member

Posts: 668

Joined: Thu Jan 07, 2010 4:32 pm

Location: Cork, Ireland

Post Wed Jul 14, 2010 7:43 pm

Re: Mul-t-lock 7 pin padlock.

I saw one of them on ebay and was going to bid on it .....very nice lock .
[“A clear conscience is usually the sign of a bad memory.”.

http://www.youtube.com/user/bouncer965
<<

ChemicalRobot

User avatar

Contributor
Contributor

Posts: 348

Joined: Wed Mar 10, 2010 7:12 pm

Location: Oregon, USA

Post Wed Jul 14, 2010 7:46 pm

Re: Mul-t-lock 7 pin padlock.

Is there possibly a retaining screw inside the hole where the shackle goes?
Howdy!
<<

jonnyboy091373

User avatar

Familiar Face

Posts: 80

Joined: Sat May 09, 2009 6:52 am

Location: Bangor, Maine

Post Wed Jul 14, 2010 7:49 pm

Re: Mul-t-lock 7 pin padlock.

here is a link to the person that sold it to me. they have a bunch of them, and you should be able to get one for a good price.
http://cgi.ebay.com/mul-t-lock-padlock- ... 2a089aaa06
<<

jonnyboy091373

User avatar

Familiar Face

Posts: 80

Joined: Sat May 09, 2009 6:52 am

Location: Bangor, Maine

Post Wed Jul 14, 2010 7:51 pm

Re: Mul-t-lock 7 pin padlock.

ChemicalRobot wrote:Is there possibly a retaining screw inside the hole where the shackle goes?

there is, but even removing that only make it wiggle. I think it has something to do with a little pin on the side I have to push in. Saw it in a youtube video. just not 100% sure, and i dont want to break anything.
<<

mbpick34

User avatar

Familiar Face

Posts: 146

Joined: Sun Jun 13, 2010 12:55 pm

Location: Norway

Post Wed Jul 14, 2010 8:00 pm

Re: Mul-t-lock 7 pin padlock.

thats a nice padlock
<<

datagram

Familiar Face

Posts: 95

Joined: Fri May 28, 2010 5:25 pm

Location: Los Angeles

Post Sat Jul 17, 2010 3:12 am

Re: Mul-t-lock 7 pin padlock.

Mul-T-Lock G-series padlocks use a two part cylinder retainer mechanism. To disassemble:

1. Unlock the padlock.
2. Unscrew the retaining screw in the shackle hole.
3. Tap in the retaining pin on the side of the lock. There will be two holes; one is for drainage (larger, empty hole) and the other is the retaining pin (smaller, filled hole).

The retaining pin taps into the retaining screw hole, remove it from there. Once both are out of the way you can remove the cylinder from the padlock body.

dg
<<

jonnyboy091373

User avatar

Familiar Face

Posts: 80

Joined: Sat May 09, 2009 6:52 am

Location: Bangor, Maine

Post Mon Jul 19, 2010 6:51 pm

Re: Mul-t-lock 7 pin padlock.

datagram wrote:Mul-T-Lock G-series padlocks use a two part cylinder retainer mechanism. To disassemble:

1. Unlock the padlock.
2. Unscrew the retaining screw in the shackle hole.
3. Tap in the retaining pin on the side of the lock. There will be two holes; one is for drainage (larger, empty hole) and the other is the retaining pin (smaller, filled hole).

The retaining pin taps into the retaining screw hole, remove it from there. Once both are out of the way you can remove the cylinder from the padlock body.

dg

yup, that did the trick. I just wasn't 100% sure on what to do. I wasn't tapping on that pin hard enough. It was good to see the inside of this lock. all the drivers were spools.
<<

mbpick34

User avatar

Familiar Face

Posts: 146

Joined: Sun Jun 13, 2010 12:55 pm

Location: Norway

Post Mon Jul 19, 2010 7:35 pm

Re: Mul-t-lock 7 pin padlock.

a picture of the pin stack would be nice telescop pin systems are cool
<<

datagram

Familiar Face

Posts: 95

Joined: Fri May 28, 2010 5:25 pm

Location: Los Angeles

Post Mon Jul 19, 2010 8:46 pm

Re: Mul-t-lock 7 pin padlock.

mbpick34 wrote:a picture of the pin stack would be nice telescop pin systems are cool


The padlock he has uses a 7x7 core so it isn't a telescoping Mul-T-Lock. If you want pictures you can read the Mul-T-Lock article at http://www.lockpickingforensics.com/articles.php :)

dg
<<

mbpick34

User avatar

Familiar Face

Posts: 146

Joined: Sun Jun 13, 2010 12:55 pm

Location: Norway

Post Mon Jul 19, 2010 9:09 pm

Re: Mul-t-lock 7 pin padlock.

thx datagram reading article now and btw thats a awesome web site you got there :cool:

Return to Lock Porn

Who is online

Users browsing this forum: CommonCrawl [Bot]

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware