Nabub Israeli Imitation Mul-t-lock Mortice Picked

[whizdumb]

Hey guys,

I had the day off today and figured I'd spend it trying to tackle a few of the different lock in my collection that I had not yet picked. Sure enough earlier I picked that WA keyway Best cylinder. Now for the first time ever I picked an Israeli made Imitation Mul-T-Lock branded Nabub (my first pin -in -pin dimple lock). This is a 5x5 pin-in-pin Classic Mul-T-Lock style lock with a crazy High - Low - Low - Low - High Bitting. It was difficult to get around the three lower cut pins right in the middle of the cylinder. This particular lock did however have a crazy false set so I think the tolerances are a little loose. However, it was a perfect lock to learn basic pin-in-pin design and get a feel for it. I look forward to more pin-in-pin locks in the future. Enjoy.

Picture 002.jpg

Happy Picking,
Whizdumb

[.45cal]

It could be that the tolerances in your lock are loose but even in a Mul-T-Lock the false set you get once all the exterior pins are set is huge. Good job

[whizdumb]

It could be that the tolerances in your lock are loose but even in a Mul-T-Lock the false set you get once all the exterior pins are set is huge. Good job

Thanks 45cal. I had heard about the false sets in Mul-T-Lock's before and knew that they where rather large, I guess I was just so blown away by the rotation because I had never experienced a false set like that ever before in any lock. These are super fun to pick though I'll definitely give them that.

[bezza1]

great job mate

[KokomoLock]

Great Job!!!

[xeo]

Nice job man those are really fun to pick

[Xrax]

nice man, just ordered a multi myself lotsa fun

[Solomon]

Good stuff whiz, I think the tolerances in those ones are very poor compared to MTL though. LSA did one on cam and it took him maybe 20 secs to open