.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Hey guys,

I had the day off today and figured I'd spend it trying to tackle a few of the different lock in my collection that I had not yet picked. Sure enough earlier I picked that WA keyway Best cylinder. Now for the first time ever I picked an Israeli made Imitation Mul-T-Lock branded Nabub (my first pin -in -pin dimple lock). This is a 5x5 pin-in-pin Classic Mul-T-Lock style lock with a crazy High - Low - Low - Low - High Bitting. It was difficult to get around the three lower cut pins right in the middle of the cylinder. This particular lock did however have a crazy false set so I think the tolerances are a little loose. However, it was a perfect lock to learn basic pin-in-pin design and get a feel for it. I look forward to more pin-in-pin locks in the future. Enjoy.



Happy Picking,
Whizdumb

It could be that the tolerances in your lock are loose but even in a Mul-T-Lock the false set you get once all the exterior pins are set is huge. Good job

Thanks 45cal. I had heard about the false sets in Mul-T-Lock's before and knew that they where rather large, I guess I was just so blown away by the rotation because I had never experienced a false set like that ever before in any lock. These are super fun to pick though I'll definitely give them that.

great job mate

Great Job!!!

Nice job man those are really fun to pick

nice man, just ordered a multi myself lotsa fun

Good stuff whiz, I think the tolerances in those ones are very poor compared to MTL though. LSA did one on cam and it took him maybe 20 secs to open