.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Nov 16, 2010 8:26 pm**

Can anyone identify this keyway? It's a 7-pin

Picture 45.jpg

Picture 43.jpg

Posted: **Tue Nov 16, 2010 8:37 pm**

i think the blank for it is 1004AR

Posted: **Tue Nov 16, 2010 8:39 pm**

wikid bitting... have you picked it?

Posted: **Tue Nov 16, 2010 8:45 pm**

I've picked to operating, which has a similar nasty bitting, but the control line (key shown) has that super deep cut, its difficult.. I'm still trying

Posted: **Tue Nov 16, 2010 8:58 pm**

cool, nice work... makd a vid

Posted: **Tue Nov 16, 2010 10:12 pm**

bezza1 wrote:i think the blank for it is 1004AR

Bezza, if you didn't post this I may not have found seen this... But it'd be a 1004A (lockwood L4), you've got the reverse keyway. Other than that, the only minor issue is that the 1004A is only a 6 pin key. You'd have to cut the shoulders back to make the blade long enough to get that seventh pin.

Posted: **Tue Nov 16, 2010 10:37 pm**

I want that cylinder!! Tried to buy one by itself a year or so ago but it went for to much money!! Very nice and great work picking it!!!

Posted: **Tue Nov 16, 2010 11:10 pm**

1004al = 7pin

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Lockwood LFIC

Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC

Re: Lockwood LFIC