Page 1 of 1

SET U.S. American military padlock

PostPosted: Wed Jul 21, 2010 7:54 pm
by awol70
yeah.. set US... cool old lock and one of my fave military locks.

Re: SET U.S. American military padlock

PostPosted: Wed Jul 21, 2010 8:09 pm
by bezza1
nice lock you got there mate

Re: SET U.S. American military padlock

PostPosted: Wed Jul 21, 2010 9:06 pm
by chris
Quite a beaut....what is the age of it? got any info on it?

Re: SET U.S. American military padlock

PostPosted: Wed Jul 21, 2010 9:07 pm
by aarpazthelockpicker
i remember a while back you said you need a control key to take the core out, but i have one of these and what you need to do is get a punch or a drift that will fit in the hole the shackle goes in (the one exposed when you unlock it) and tap on it with a hammer and the core will slide out. dont feel like you are going to break it beacuse you will not. make sure the drift does not hit the locking bar that holds the shackle closed/

Re: SET U.S. American military padlock

PostPosted: Sun Jul 25, 2010 11:44 am
by awol70
aarpazthelockpicker wrote:i remember a while back you said you need a control key to take the core out, but i have one of these and what you need to do is get a punch or a drift that will fit in the hole the shackle goes in (the one exposed when you unlock it) and tap on it with a hammer and the core will slide out. dont feel like you are going to break it beacuse you will not. make sure the drift does not hit the locking bar that holds the shackle closed/

cool, aarpaz, thanks.
i have always wondered about that... so, what actually retains the core?
is it just pressed in?
seems to me if it just taps out what would stop a slide hammer/nose puller just yanking the core out?