.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Josh wrote:offset balls though on the other hand, dont break as often, but you still want to watch the temper on it.

HallisChalmers wrote:

Josh wrote:offset balls though on the other hand, dont break as often, but you still want to watch the temper on it.

Lockylew: Fixed your quote again

I don't know, I get my balls offset and broke quite a few times....and I remain fairly even tempered about it too.

Oh, I'm sorry! You meant picks...

Seriously though, the offset diamond comes in handy when trying to reach a pin that sets lower behind another pin, like Josh said. As for an offset ball pick, it will work a little bit better when doing the same thing (setting a pin thats lower than another pin) in a lock that uses those big Schlage pins that you find in rim cylinder or mortise locks.

The only problem that I have with either one is that they'll snap if you get real vigourous and heavy-handed when raking. Also, the half-diamond will get pretty rough on the pins if you go too hard.

Josh wrote:personally, i would go for the short hook all the way. that is just because that is always the first thing i reach for and the one that works when all else fails.

but what is good about the offsets is that they allow for the raking method and the spp method as well as being able to reach easily to the back pins. now, offest diamonds tend to brake easily if you dont be extra careful with the head of the pick when forming it. make sure it it doesnt loose temper.
offset balls though on the other hand, dont break as often, but you still want to watch the temper on it.

if you are making a few of them, i would do one of each rake, and 2 short hooks.

Jc2intelligent wrote:

HallisChalmers wrote:

Josh wrote:offset balls though on the other hand, dont break as often, but you still want to watch the temper on it.

Lockylew: Fixed your quote again

I don't know, I get my balls offset and broke quite a few times....and I remain fairly even tempered about it too.

Oh, I'm sorry! You meant picks...

Seriously though, the offset diamond comes in handy when trying to reach a pin that sets lower behind another pin, like Josh said. As for an offset ball pick, it will work a little bit better when doing the same thing (setting a pin thats lower than another pin) in a lock that uses those big Schlage pins that you find in rim cylinder or mortise locks.

The only problem that I have with either one is that they'll snap if you get real vigourous and heavy-handed when raking. Also, the half-diamond will get pretty rough on the pins if you go too hard.

hehehe. my girl does that to me sometimes....i stay tempered about it too. hehe....anyway...thanks hallis. so i guess i should make an offset ball then eh? now that i think about it, my locksmith uses rytan picks,but only the offset diamond,the regular diamond,and the snake rake. and the offset diamonds they use get the sh*t bent outta them.

HallisChalmers wrote:

Jc2intelligent wrote:

HallisChalmers wrote:

Josh wrote:offset balls though on the other hand, dont break as often, but you still want to watch the temper on it.

Lockylew: Fixed your quote again

I don't know, I get my balls offset and broke quite a few times....and I remain fairly even tempered about it too.

Oh, I'm sorry! You meant picks...

Seriously though, the offset diamond comes in handy when trying to reach a pin that sets lower behind another pin, like Josh said. As for an offset ball pick, it will work a little bit better when doing the same thing (setting a pin thats lower than another pin) in a lock that uses those big Schlage pins that you find in rim cylinder or mortise locks.

The only problem that I have with either one is that they'll snap if you get real vigourous and heavy-handed when raking. Also, the half-diamond will get pretty rough on the pins if you go too hard.

hehehe. my girl does that to me sometimes....i stay tempered about it too. hehe....anyway...thanks hallis. so i guess i should make an offset ball then eh? now that i think about it, my locksmith uses rytan picks,but only the offset diamond,the regular diamond,and the snake rake. and the offset diamonds they use get the sh*t bent outta them.

It doesn't hurt to have these in your arsenal of picks. Just see if you can find some material that is strong enough so it won't bend too easily. It really depends on the keyway that you'll be working on. If you're working on a rim or mortise - they'll have pretty hefty pins in them.

Padlocks on the other hand vary from large pins in large keyways to very tight keyways with small pins. However, I've found that Best, Yale, Eagle, Abus, etc. have very tight keyways and you'll need a thin offset diamond to get in some of those locks, especially if they have wild bitting.

For example if the lock has an exaggerated hi-lo-hi-lo-hi bitting, well my friend, you'll be scratching your head for a while.

At least that's what happens to me, anyways.