Page 2 of 2
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Mar 20, 2011 4:01 pm
by KokomoLock
whizdumb81 wrote:I wonder.. Is a strip of soda can aluminum the right thickness for doing this?
No, Way too thick!!! Use soda can for shimming padlock shackles!!
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Mar 20, 2011 4:15 pm
by ChemicalRobot
KokomoLock wrote:whizdumb81 wrote:I wonder.. Is a strip of soda can aluminum the right thickness for doing this?
No, Way too thick!!! Use soda can for shimming padlock shackles!!
I tried to use a soda can once, and I can verify that they are too thick. It ended up jamming up the plug once it was past a few pins. Luckily it was a cheap cylinder.
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Mar 20, 2011 4:22 pm
by KokomoLock
ChemicalRobot wrote:KokomoLock wrote:whizdumb81 wrote:I wonder.. Is a strip of soda can aluminum the right thickness for doing this?
No, Way too thick!!! Use soda can for shimming padlock shackles!!
I tried to use a soda can once, and I can verify that they are too thick. It ended up jamming up the plug once it was past a few pins. Luckily it was a cheap cylinder.
Really, you actually shimmed a couple of pins with one?? I am gonna have to get a soda can and see, they must be making them a lot thinner than they did back in the old days!!
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Mar 20, 2011 5:32 pm
by ChemicalRobot
KokomoLock wrote:Really, you actually shimmed a couple of pins with one?? I am gonna have to get a soda can and see, they must be making them a lot thinner than they did back in the old days!!
Haha, yeah it was a Shasta can. The main problem was that once it jammed up, I tried to take it out and it tore, thus making it stuck for good.
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Mar 20, 2011 7:03 pm
by the picker
i jest took apart a couple of security strips last week for the same thing lol good vid
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun May 22, 2011 8:36 am
by Oldfast
Very good info. Thanks Koko! I too, had always picked w/ a shim.
Keep up the good work... lots of people benefit... I know I have!
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun May 22, 2011 11:35 am
by cyberpick
Great vid i will have ago 4 myself soon as i find a security strip,Thanks 4 the info ...
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun May 22, 2011 1:20 pm
by aoyue2702
really cool!
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Sep 30, 2012 12:30 pm
by KokomoLock
Caveman wrote:My metal tape mesaure is like a 15 feed shim. Its even curbed
Cool, how thick is it and do you have a brand name?? That would be perfect!!!
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Sep 30, 2012 1:13 pm
by Alaphablue
You have a true teacher quality, kokomolock locksmith university a higher class of knowledge .
Re: Locksmithing 101 - Lock Shimming
Posted:
Sun Sep 30, 2012 1:27 pm
by KokomoLock
Alaphablue wrote:You have a true teacher quality, kokomolock locksmith university a higher class of knowledge .
LOL, Thank You Sir!!!