Master Padlock Codes Needed

[MrWizard]

Would anyone happen to have the obscure bitting for either of these Master padlock code numbers? A5U565 or A5U587 ? Nothing found in my Reed books or older HPC software that I have. Locks are old 4 pin cylds 1K keyways.

Richard

[bitbuster]

i can check my old Master padlock code books. it may be awhile.

[macgng]

I found a master padlock series for U### but not A5U###.... this might be it, i dunno

  Code:

Code U587: Master padlock
Cuts are:      1    5    3    4
Blanks:        1K   Master


Code U565: Master padlock
Cuts are:      4    1    5    3
Blanks:        1K   Master

Here is D&S info:

  Code:

Spacing    Depth
.187      .210
.312      .256
.437      .194
.562      .225
       
Root:  .035     Angle: 90

[bitbuster]

DSCI0103.JPG

i found what mac found in the blue book.

[MrWizard]

I found one code on Reed index page that isn't either one I need showing the bitting in the right series. If you find a series that has bitting matching the one below we have a winner.

A5U725 cuts are 3564

[jeffmoss26]

Nothing in Instacode.

[macgng]

I found one code on Reed index page that isn't either one I need showing the bitting in the right series. If you find a series that has bitting matching the one below we have a winner.

A5U725 cuts are 3564

nope i get " 6 2 5 2 " for U725


the search continues

[grit1]

Hey folks - can someone help me with a master key code? Looking for the bitting for 2852 on an M1 blank. My ancient version of Codesource has this series missing. Many thanks!

[jeffmoss26]

cuts are 3152

[just1pick+open]

cuts are 3152

I get 3153

[jeffmoss26]

sorry - you are right

[grit1]

Thank you!!