FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

Dont know fellas ! key id

<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Sun Aug 19, 2018 5:59 am

Dont know fellas ! key id

So got sent this photo of the witter - westfalia 2w51 key cost him just under £40.00 for 2 of them

codes run 2w01 to 2w50 and are not a problem ... but 2w51 to 2w99 available from them only ! :armed:

Thought id put it up as the 2w01 to 2w50 are single cut keys - strange also as there website shows

single cut keys on all these codes - blank and bitting - codes unknown on this series & double cut keys :geek:

kept is promise and sent the key photos when they where received - any ideas fellas

post up any photos of the keys with codes ... 2w51 to 2w99 you may find or come across in this thread - topic

key codes are stamped on the red top fyi

http://www.witter-towbars.co.uk website click on Accessories - keys


cheers ringo
You do not have the required permissions to view the files attached to this post.
<<

jharveee

Prolific Poster

Posts: 999

Joined: Thu Aug 22, 2013 9:14 am

Location: San Marcos, Ca.

Post Sun Aug 19, 2018 10:26 am

Re: Dont know fellas ! key id

1611R? Codes got me nowhere, here at the house. I'll check our key board. Do you have another photo of the tip? Kind of fuzzy.?
Last edited by jharveee on Mon Aug 20, 2018 7:48 am, edited 1 time in total.
<<

Visitor

Active Member

Posts: 285

Joined: Sat Sep 16, 2017 5:48 am

Post Mon Aug 20, 2018 6:22 am

Re: Dont know fellas ! key id

What's the question here?
The keys look like cheap cabinet keys with a plastic head £40?? Steel keys without the plastic head are sold for a few pence each. I've got hundreds of them in stock with that profile.
As for cut codes? They are seller/maker proprietary, if they are not in instacode etc then you will have to go direct.
It's also a really bad idea for people to be posting code info in public especially for trailer/caravan locks.
But again, what's your question? Your post didn't make much sence.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Fri Aug 24, 2018 12:21 pm

Re: Dont know fellas ! key id

jharveee wrote:1611R? Codes got me nowhere, here at the house. I'll check our key board. Do you have another photo of the tip? Kind of fuzzy.?



Had a good look and thought it could be a LF21 or Dom blank - But really need one in hand to measure TO BE SURE

other photos blur also after checking - no good to us ! :geek:

Dom12d jma Possible but nothing on instacode or genericode only 10 cut code series
Last edited by 10ringo10 on Fri Aug 24, 2018 12:38 pm, edited 1 time in total.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Fri Aug 24, 2018 12:29 pm

Re: Dont know fellas ! key id

Visitor wrote:What's the question here?
The keys look like cheap cabinet keys with a plastic head £40?? Steel keys without the plastic head are sold for a few pence each. I've got hundreds of them in stock with that profile.
As for cut codes? They are seller/maker proprietary, if they are not in instacode etc then you will have to go direct.
It's also a really bad idea for people to be posting code info in public especially for trailer/caravan locks.
But again, what's your question? Your post didn't make much sence.


There cleaning up to be sure - and its a key that's been out for over a decade and looking at the website

its even gone up in price - £ 25.00 each will try and find out what key blank is being used is the 1st step

made a guide a few years back on towbars - popular in Europe so a bonus to find any details regarding this one

strongly suspect its a Dom key
<<

Visitor

Active Member

Posts: 285

Joined: Sat Sep 16, 2017 5:48 am

Post Sat Aug 25, 2018 6:44 am

Re: Dont know fellas ! key id

There's a few l&f that look the same but we need the tip better focused or a pic of the other side.
<<

GWiens2001

User avatar

Lock-Goblin-Gordon
Lock-Goblin-Gordon

Posts: 3795

Joined: Thu Oct 25, 2012 9:05 pm

Location: Arizona, United States

Post Sat Aug 25, 2018 12:12 pm

Re: Dont know fellas ! key id

Those look like the same keyway for the cheaper Craftsman tool boxes.

Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
<<

C locked

Familiar Face

Posts: 52

Joined: Fri Feb 21, 2014 4:23 am

Location: Australia

Post Sun Aug 26, 2018 8:21 am

Re: Dont know fellas ! key id

silca lf37r. at a guess but a scale or ruler would make this easier.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Sun Aug 26, 2018 3:12 pm

Re: Dont know fellas ! key id

Made a bit of a discovery - keep you posted on this anyone have the ronis 4R - series came out 2013

cheers

ringo
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Mon Aug 27, 2018 8:39 am

Re: Dont know fellas ! key id

Ronis code on elite locker - 4R Series
You do not have the required permissions to view the files attached to this post.
<<

Werewolf

Familiar Face

Posts: 234

Joined: Sat Jun 11, 2011 4:00 am

Location: Belgium

Post Mon Aug 27, 2018 8:45 am

Re: Dont know fellas ! key id

This one isn't in Silca or Instacode yet.
The blank is available , Silca RO84

this may be your best option
https://www.fastkeys.co.uk/keys/man/RON ... 4R4000/823
"Who are you and how did you get in here ?"
"I'm the locksmith , and i'm a locksmith"
<<

Visitor

Active Member

Posts: 285

Joined: Sat Sep 16, 2017 5:48 am

Post Tue Aug 28, 2018 4:00 am

Re: Dont know fellas ! key id

Can you point us in the direction of your hitch lock guide you mentioned putting together, sounds interesting.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Tue Aug 28, 2018 5:29 am

Re: Dont know fellas ! key id

Werewolf wrote:This one isn't in Silca or Instacode yet.
The blank is available , Silca RO84

this may be your best option
https://www.fastkeys.co.uk/keys/man/RON ... 4R4000/823


Thanks wolf - strange how Fast keys have got the codes , I wonder which code software as them on then !

getting asked every week and turning PEEPS away is not good - :hammering:

Or are they the same as another code series and HAVE just CHANGED blank and barrel as me thinking ! :ugeek:
Last edited by 10ringo10 on Tue Aug 28, 2018 8:57 am, edited 1 time in total.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Tue Aug 28, 2018 5:35 am

Re: Dont know fellas ! key id

Visitor wrote:Can you point us in the direction of your hitch lock guide you mentioned putting together, sounds interesting.


Removed as not yet complete oris - alko and a few others to be added when I get time .. lol
Last edited by 10ringo10 on Wed Aug 29, 2018 1:15 pm, edited 1 time in total.
<<

Werewolf

Familiar Face

Posts: 234

Joined: Sat Jun 11, 2011 4:00 am

Location: Belgium

Post Tue Aug 28, 2018 10:35 am

Re: Dont know fellas ! key id

10ringo10 wrote:
Werewolf wrote:This one isn't in Silca or Instacode yet.
The blank is available , Silca RO84

this may be your best option
https://www.fastkeys.co.uk/keys/man/RON ... 4R4000/823


Thanks wolf - strange how Fast keys have got the codes , I wonder which code software as them on then !

getting asked every week and turning PEEPS away is not good - :hammering:

Or are they the same as another code series and HAVE just CHANGED blank and barrel as me thinking ! :ugeek:


I heard on another forum that you can get the code list from Ronis , if you buy 5000 blanks ...
That probably is how this guy has it.
"Who are you and how did you get in here ?"
"I'm the locksmith , and i'm a locksmith"
Next

Return to Key Making

Who is online

Users browsing this forum: No registered users

Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware