FAQ  •  Register  •  Login
UKLockpickers.co.uk Lockpicking supplies such as Lockpicks, tools, and more! COMMANDOLOCK.COM Military grade padlock systems lockpickshop.com A source for lockpicking supplies such as lockpicks, locksmith tools, and more!

See-thru lever lock

<<

jharveee

Prolific Poster

Posts: 999

Joined: Thu Aug 22, 2013 9:14 am

Location: San Marcos, Ca.

Post Sun Aug 07, 2016 6:36 am

Re: See-thru lever lock

Hmm ...
The last photo in the description shows both the Clear cover and solid metal cover. Being that it's transparent, perhaps you didn't see it?
Maybe they forgot to include it.? I would ask for it, or a refund. Ship them back an empty package, and tell them the "transparent lock" is hard to find.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Sun Aug 07, 2016 5:51 pm

Re: See-thru lever lock

Does a magnet stick to the bolt - possible new topic of conversation if not ...
<<

Patrick Star

User avatar

Active Member

Posts: 293

Joined: Sun Apr 10, 2016 3:40 pm

Location: Sweden

Post Mon Aug 08, 2016 11:56 am

Re: See-thru lever lock

Bolt no, case yes.
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Mon Aug 08, 2016 2:11 pm

Re: See-thru lever lock

Patrick Star wrote:Bolt no, case yes.

No magnetic properties usually means - a cast alloy of some kind as been used - Chinese cast alloy
possible 60 sec opening time if fitted to a safe ...given the test results the metal case would help as the heat builds
through the key way ...and any relocker fitted to rear - back of lock unless it was made of the same alloy would
be next to useless as the bolt ...slowly disappears leaving a see thru - lock indeed

great as a low cost practice lock - always best to check with a magnet locking bolts and cases to see if a cast alloy
as been used as some cast alloys... have a very LOW melting point :???:
<<

10ringo10

User avatar

Prolific Poster

Posts: 1357

Joined: Fri May 14, 2010 11:45 am

Location: EUROPE

Post Wed Aug 10, 2016 2:21 am

Re: See-thru lever lock

great topic ...
<<

LockManipulator

User avatar

Active Member

Posts: 593

Joined: Wed Jan 11, 2012 6:33 pm

Location: California, US

Post Wed Aug 10, 2016 4:25 pm

Re: See-thru lever lock

I got mine today. It has a clear front held on by a screw on one side (the other side lifts up a bit). But, it came cracked. I'm contacting them now about it. The plastic feels very cheap. If it didn't have any cracks, it wouldn't be a problem but it feels much more likely to have pieces break off now. It also has a metal plate to swap out with the clear covering too. http://i.imgur.com/m29dsOL.jpg
Previous

Return to Cut-aways

Who is online

Users browsing this forum: No registered users

cron
Don't forget to visit our sponsors for all of your lockpicking needs!
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Grop
"CA Black" theme designed by stsoftware