.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Tue Mar 25, 2014 9:40 am**

I got some ASSA 7-pin oval cylinders a few days back. They're could do with a good clean since the plugs feel all gucked up.

3 of them came with an ass I've not seen before (the 3 on the left). My questions is: How to gut these 3 without damage to an odd Assa's ass?

Posted: **Tue Mar 25, 2014 9:49 am**

Some time ago there was the same question on another forum, I guessed you just have to pull out the tailpiece hard... and IIRC it worked.

Cheers

Posted: **Tue Mar 25, 2014 9:59 am**

femurat wrote:Some time ago there was the same question on another forum, I guessed you just have to pull out the tailpiece hard... and IIRC it worked.

Cheers

Thank you my friend. i was worried about reassemble if I used force, but all is cool.

Many thanks

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Odd Ass on an Assa

Odd Ass on an Assa

Re: Odd Ass on an Assa

Re: Odd Ass on an Assa