Papa Gleb wrote:Escher, thank you very much for the advise, its much appreciated.
As for the drill press, have you seen a press for $50 or are you estimating because I have done a good amount of research and the cheapest I can find go for $70-80. Same question for the belt sander. If possible please post a link.
As for how these picks work, I will give them a good test once I get them smoothed out enough to use and share my results.
There are two choices for hand belt sanders. The first is a standard belt sander (above) which must be clamped upside down in a work mate. The second is a 1/2 x 18" Black and Decker which I now use for small items like picks.
As for drill presses, this is one I paid $39.99 for at Walmart years ago.
You are correct, I am low on the drill press as this type now run around $79 on Amazon, but with free delivery. I recommend you try local Kijiji, as I found a good one for $50 on the Winnipeg Kijiji site. I am also posting links to two sanders. The 1/2 x 18 is $49, (Canadian) but I bought mine on sale for $29 so I am sure you can find a deal.
Finally, I posted a link to my old tutorial on pick making which might be of help.
http://www.amazon.com/Black-Decker-BR31 ... 210&sr=1-2http://www.amazon.ca/Black-Decker-CYPF2 ... B005KRY946http://www.kijiji.ca/v-power-tool/winni ... nFlag=truehttp://www.keypicking.com/viewtopic.php?f=39&t=9617