Lockwood 334B45 PiP challenge lock
After the fun I had in modifying two LW 234M45s recently to use Flywheel’s Pin-in-Pin design and trading them on, I decided to do another. With knowing exactly what’s in it and where I’ve gotten really close to getting it, but with my current 5 attempts still no open.
#3 driver is a drunken T-pin, with the lower part pictured made from the threaded end of a bicycle spoke, separated from the spring by a master wafer. #4 and #6 are Flywheel-style Pin-in-Pin drivers. This time I polished the nails, thinning them a bit, and used a smaller drill bit on the outer jackets.
The core is from a LW 334B45, which it’s back in now. It was originally packed with 5 of the newer discrete steel spools from Abloy. I found some amazing cut-aways on KP actually of this padlock and core by jzz20: viewtopic.php?f=39&t=2808 (very awesome)
If someone wants to trade for it please nudge me (Papa Gleb?) (:
Hats off again to Flywheel.