Custom Mul T Lock tools
16 posts
• Page 1 of 2 • 1, 2
Hi people just thought I'd share my two new picks which I made earlier, they were auto picks but I did'nt really use them, so I decided to make them more useful, and made them into MTL picks : ) They are a bit rough but they will do till I get a bit more time and some more materials to fab some better ones up : )
You do not have the required permissions to view the files attached to this post.
PERSAVIERNCE IS THE KEY
Re: Custom Mul T Lock tools
Good job mate!!!
Did you use them to concur an MTL already?
Did you use them to concur an MTL already?
Started picking on 23 Feb 2009. Current Stats: Picked 164 different locks so far.
Latest Victory: ABUS EC75/50
Latest Victory: ABUS EC75/50
Re: Custom Mul T Lock tools
l0ckp1cker wrote:Good job mate!!!
Did you use them to concur an MTL already?
Yes mate i done the MTL E Series in under 5mins, unfortunatley not on vam, but i will get it tomorow : )
PERSAVIERNCE IS THE KEY
Re: Custom Mul T Lock tools
uklockpicker wrote:great adjustment m8, hope to see many more picked
so do I mate, its just finding the dosh to get me haands on 1 lol : )
PERSAVIERNCE IS THE KEY
Re: Custom Mul T Lock tools
nice work! it seems to me lockpicker, that wiper
inserts could make some nice picks for these lock.
inserts could make some nice picks for these lock.
Re: Custom Mul T Lock tools
bumpin88 wrote:nice work! it seems to me lockpicker, that wiper
inserts could make some nice picks for these lock.
wiper inserts will work great but living in the uk i cant get my hands on thicker or wider inserts for some reason they are all thin : (
PERSAVIERNCE IS THE KEY
Re: Custom Mul T Lock tools
wicked mod!
they look great!
they look great!
Re: Custom Mul T Lock tools
I need to pick one of those locks up, I haven't seen any around, maybe an ebay purchase in the near future. Try to make some picks for one. Where are these locks commonly found, I haven't seen any around here in the locksmith shops?
I have been in the souls of many women, but I always end up on the soles of there shoes.
Re: Custom Mul T Lock tools
awol70 wrote:wicked mod!
they look great!
THANX BUDDY
PERSAVIERNCE IS THE KEY
Re: Custom Mul T Lock tools
the lockpickkid wrote:I need to pick one of those locks up, I haven't seen any around, maybe an ebay purchase in the near future. Try to make some picks for one. Where are these locks commonly found, I haven't seen any around here in the locksmith shops?
Ebay is a good source, uklockpickers.co.uk will get you one no probs other than that try setting up a new post for wanted mul t lock : )
PERSAVIERNCE IS THE KEY
Lord Emeritus of Keypicking HallisChalmers
Posts: 2070
Joined: Mon Apr 28, 2008 2:46 pm
Location: Hell
Re: Custom Mul T Lock tools
the lockpickkid wrote:I need to pick one of those locks up, I haven't seen any around, maybe an ebay purchase in the near future. Try to make some picks for one. Where are these locks commonly found, I haven't seen any around here in the locksmith shops?
Here you go:
http://cgi.ebay.com/Mul-T-Lock-G47G1-D-Padlock-NIB-Locksmith-High-Security_W0QQitemZ180351864738QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item29fdcf0fa2&_trksid=p3286.m20.l1116
http://cgi.ebay.com/Mul-T-Lock-C13PC1-D-Padlock-NIB-Locksmith-High-Security_W0QQitemZ170247058846QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27a383f59e&_trksid=p3286.m20.l1116
Re: Custom Mul T Lock tools
uklockpicka wrote:bumpin88 wrote:nice work! it seems to me lockpicker, that wiper
inserts could make some nice picks for these lock.
wiper inserts will work great but living in the uk i cant get my hands on thicker or wider inserts for some reason they are all thin : (
just picked up on this thread & you're right about the wiper blades
try engine dipsticks I find the steel very strong may be the fact it is in the
hot oil of the engine the stick I got was approx 5mm wide just under 1mm
thick I used it to make a bogata & it was so strong hope this helped
catch ya lata have fun..............................
Re: Custom Mul T Lock tools
Thanks Hallis, Those locks are a little spendy aren't they! When I get caught up I want to learn how to pick those, they do look like fun.
I have been in the souls of many women, but I always end up on the soles of there shoes.
Lord Emeritus of Keypicking HallisChalmers
Posts: 2070
Joined: Mon Apr 28, 2008 2:46 pm
Location: Hell
Re: Custom Mul T Lock tools
the lockpickkid wrote:Thanks Hallis, Those locks are a little spendy aren't they! When I get caught up I want to learn how to pick those, they do look like fun.
They are expensive as hell. But like a venereal disease - you have to experience it to appreciate it. A "must have" for any lockpicker/collector.
16 posts
• Page 1 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users