tubular pick / replacment finger pickS?

[Jimmy-slim-smith]

I have a southord 7 pin tubular lockpick, have had it for at least 6 years, anyway one of the finger pick was bent, I looked up southords web site and seen no replacement picks ,,,,

does anyone no where i can get some replacement picks that will fit in the southord pick,

I really appreciate anyones help, I am attemping to get this pick fix asap as i use it at least a couple times a week,

thanks in advance

JimmySmith
Portland oregon

[awol70]

bobby pins work,but they have to be sanded down slightly....
nice to see you back,Jimmy....

[loki]

You might try calling Southord and asking if they will send some replacement pins. I have talked to them before, and them seem like pretty good folks.
Many times, spare parts are available, just not put on the web page due to time issues. Toll Free Number: 877-540-8795


In a pinch, you can probably make a new pin from a piece of windshield wiper blade backing. If you go this route you may need to do a little searching for a blade
having the correct backing thickness.

[uklockpicker]

I have spare parts for the klom tubular pick,including the feeler pick ends you mention,
I will forward some onto you this week m8ty

[Jimmy-slim-smith]

I really appreciate your guys help,

[jailersmith]

Lockpicks.com sells replacement feelers for HPCtubular picks. Check them also. Around $12.00 USD, I think.