.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!
A Discussion Forum For Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, Lockpicks, cutaways, and security. Simply The Best Lockpicking Forum Around! http://www.keypicking.com/
I will put this in this thread because this type of lock is... A FAIL! Check the description in the video for the details.
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 4:35 pm
by Laporte
That is so funny.
A good way to ensure you are never locked out of your house.
And a better way to ensure that anyone else is never locked out of your house, either.
Edit: It's ironic that the branding on the lock is a "turner".
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 4:40 pm
by chris
Haha, nice!
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 4:41 pm
by mister sour
Laporte wrote:That is so funny.
A good way to ensure you are never locked out of your house.
And a better way to ensure that anyone else is never locked out of your house, either.
Edit: It's ironic that the branding on the lock is a "turner".
That's exactly what i told my friend. A Turner always turns LOL
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:11 pm
by Dopug
Thats so funny, whats the point in having a lock like that?
Is the problem due to the lock not being installed properly, or is it just the stupidist design flaw ever?
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:12 pm
by KokomoLock
I have played with one of those, bad thing on them is you have to read the instructions to install it properly, that leaves out 75% of the population!!
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:17 pm
by LocksmithArmy
hahahahahahahaaahahaa
stupid
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:19 pm
by Dopug
ah so it is the installation thats at fault, is the lock just the wrong way round or something?
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:26 pm
by KokomoLock
Dopug wrote:ah so it is the installation thats at fault, is the lock just the wrong way round or something?
Don't know, something could have broken but they come from the factory set up for a right handed door, for a left handed door like in the video there is a screw that has to be removed for proper operation.
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 5:43 pm
by Oldfast
KokomoLock wrote:I have played with one of those, bad thing on them is you have to read the instructions to install it properly, that leaves out 75% of the population!!
HA! Funny shit man. Nice vid Sour... straight and to the point. lol
I was just looking at one of those the other day. The idea behind this "revolutionary LOL" lock is that you can lock your door on your way out without the need for a key. My guess too, would be improper installation due to the swing of the door.
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 6:17 pm
by nhoj_yelbom
nice!
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 8:34 pm
by bezza1
lol nice
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 10:15 pm
by mister sour
Oldfast wrote:
KokomoLock wrote:I have played with one of those, bad thing on them is you have to read the instructions to install it properly, that leaves out 75% of the population!!
HA! Funny shit man. Nice vid Sour... straight and to the point. lol
I was just looking at one of those the other day. The idea behind this "revolutionary LOL" lock is that you can lock your door on your way out without the need for a key. My guess too, would be improper installation due to the swing of the door.
Ha! So its supposed to allow the Owner to lock the door without a key. My friend bought it "Pre-installed in the door" at Menards, so, go figure lol.
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 10:42 pm
by Laporte
mister sour wrote:Ha! So its supposed to allow the Owner to lock the door without a key. My friend bought it "Pre-installed in the door" at Menards, so, go figure lol.
So, he got the lock pre-installed when he bought the door?!
That sounds like insanity to me.
Re: LOCK FAIL!!!
Posted: Wed Jun 01, 2011 11:24 pm
by Oldfast
Some of those people at Menards are not properly trained. The same day I seen that Turner, I was picking up a Schlage Secure Key for someone. At first, I thought someone had swiped the reset key from it. When the 2nd one I grabbed also was missing one I asked the guy what the deal was. He said their shipments of them lately were about 1/2 and 1/2- some w/ some w/ out reset keys.
Anyway, getting off track. He said they'd cut me one up front. After explaining the entire concept of these locks to the girl in front, lol, she proceded to simply cut me a copy (not on a reset key, mind you) lol. Anyway, long story short.. 3 fuckin' trips from the front to the back of the store and I finally left w/ my cut reset key. lol
Posted: Wed Jun 01, 2011 4:30 pm