BEST picked to control

[Steve]

ive had this best for over 3 months and never picked it once and i just sppd it to control my camera is broken right now but i still cant believe i just picked it open... finally another lock added to my picked collection now i just need to get a key made for it and i think its a A keyway im so excited right now

also are there special tools i need to use to look at the pins and such? beside i think i remember reading someone you need special tools for these type of locks

[awol70]

viewtopic.php?f=9&t=1738

[the lockpickkid]

That's a great feeling isn't it!! I had a good run where I could pick open or pick to the control line on nearly every Best I picked up, that was until I got a couple that Tooly pinned up for me, now I am a defeated picker, I can't for the life of me pick these things anymore!!

[ToolyMcgee]

Wasn't me, it was Obama

[the lockpickkid]

Wasn't me, it was Obama

Tooly, I really do hate you for that!!

I had Tooly key up some locks for me, one of them was a Schlage SC1 cylinder, he cut a key for it using a blank with a president Obama picture on it, makes me sick everytime I see it.

[ToolyMcgee]

I have a special way of opening Best locks, I figure I can open just about any in nearly 5 minutes or less, I have found a trick or two.

How's that humble pie taste Kid? It was, Destiny...

[the lockpickkid]

I have a special way of opening Best locks, I figure I can open just about any in nearly 5 minutes or less, I have found a trick or two.

How's that humble pie taste Kid? It was, Destiny...

Jerk!! I am going to erase that post. Seems these days I always say something smart, then it always bites me in the ass!

[HallisChalmers]

I have a special way of opening Best locks, I figure I can open just about any in nearly 5 minutes or less, I have found a trick or two.

How's that humble pie taste Kid? It was, Destiny...

Kinda feels like this don't it Kid?

[ToolyMcgee]

It's chiseled in the stone tablet that is LP101

[the lockpickkid]

It's chiseled in the stone tablet that is LP101

Another reason to keep my mouth shut, Lp doesn't allow you to delete posts. stupid. Oh well.

[aarpazthelockpicker]

yes you do need special tools and pins to key best i will try to make some vids. i have keyed about 10 cores. here are some of the things.

pinning and capping blocks, pin kit, key decoder, cores, locks, keys, pin ejector. ect.

[s1deshowmick]

Sweet set of tools buddy, looks like you got that number covered.

[the lockpickkid]

Has anybody had great luck with the Peterson I-Core tension tools? I mean walk up to any Best and just pull the plug like nothing, or is it harder than that? I tried to make one and couldn't get it to work. I tried it on a core that was removed, it grabbed the control lugs but for the life of me, would't put enough pressure on the cam to open it.

[aarpazthelockpicker]

never used the tension wrench never had a prob picking to the control line