schlage profile ID, please?

[awol70]

can anyone help ? never seen this one before....
thanks

[KokomoLock]

It is an SC1347 that is the ilco number for it.

[LocksmithArmy]

its nasty lookin, but alot of space for the pick...hrmm

[awol70]

It is an SC1347 that is the ilco number for it.

thank you very much once again kokomolck...=)

[Warder]

Here they are side by side...


AWOL's picture closeup...




And from the book....

[awol70]

thanks warder, that really helped me a lot..
profiles are not my forte'...a lot of memorization,when you dont own a ILCO reference book.

[magician59]

That might work, but after closer examination, I'm not convinced it's right. Look at the landing of the milling at the right of the blade (as you look down from bow to tip: the Schlage silhouettes are all square; but the corresponding broaching in the plug is beveled.

[Solomon]

Yeah, they're very similar but not exact. It's definately possible to modify the blank in the book to match what awol has though, simply by filing away a small section.

[ToolyMcgee]

C'mon guys, are you seriously scrutinizing of the text printing next to photograph of a used keyway so closely? There is only one way to be sure, fitting blanks. How many of us have seen the exterior of used locks where the keyway profile was all but faceless...

[LocksmithArmy]

lol got a medeco that nearly has no keyway wards lol, it does however restrict keys... most of the wards are just little points now lol

just goes to show how worn out a lock can get and still work