.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

first off this can only be done if picked open cw or ccw dose not matter
then i turn so the bottom of the keyway is at top and insert a short hook and locate the 4th pin sack.While applying a ccw twisting motion with the pick i slightly push the control and driver pin up into the bible then i move to the 3rd stack and do the same while putting a little pressure on the face of the core.I am trying to capture one stack above the control sleeve while i move to the other and after repeating this several times and getting both stacks above control the plug will turn back slightly and then the core can be removed
Because i only have one of these locks i cant say it will work for everyone or if mine juts has enough tolerance but i hope this help anyone who cant get control but want to remove the core.

That is pretty wild.

Great! That's thinking outside the box! I have an old medeco lfic (thanks for the correction Riyame) somewhere... when I find it I'll try this out.

Cheers

Great find the picker!

Just a quick note. This is a LFIC, not a SFIC.

Indeed. Nice one. It'll be interesting to see if others are able to do this too.

This does work I myself have used this technique in the past, works great

Fantastic. These are the posts I live for. Thanks for the write-up and pictures.

Great exploit! Thanks for posting it!