Page 1 of 2

KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 8:04 pm
by awol70
trying for the ctrl line next...


KABA PEAKS Mortise Cylinder.JPG

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 8:08 pm
by the lockpickkid
I have heard these were tough, what was it like?

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 8:16 pm
by bezza1
great job buddy (HAHA)

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 8:33 pm
by awol70
the lockpickkid wrote:I have heard these were tough, what was it like?

a bit of a PITA, but i have picked one before,so it was only moderately difficult.
ctrl will be a challenge..

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 9:30 pm
by ToolyMcgee
Just a hunch, but instead of working through all the spools false sets, try ignoring most of them.

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 10:07 pm
by awol70
ToolyMcgee wrote:Just a hunch, but instead of working through all the spools false sets, try ignoring most of them.

i try to treat them like serrations....
i will try anything tough...

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Wed Nov 11, 2009 10:40 pm
by ToolyMcgee
awol70 wrote:i try to treat them like serrations....
i will try anything tough...

That sounds right. I believe, it was a double sided mortice...

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Thu Nov 12, 2009 7:02 pm
by aarpazthelockpicker
mine was easy i picked it to the control

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Fri Nov 13, 2009 9:45 am
by awol70
aarpazthelockpicker wrote:mine was easy i picked it to the control

yeah but you are a best :arrow: :ugeek: lol...

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Sat Nov 14, 2009 9:04 pm
by awol70
there we go....(thanks for you help as well,Tooly...)
now to find a blank....

DSC04629.JPG

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Sat Nov 14, 2009 10:57 pm
by Solomon
Congrats getting it picked to control, that's some serious skill right there. No pics of the pins, wiz? That's just teasing. :mrgreen:

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Sat Nov 14, 2009 11:24 pm
by awol70
Solomon wrote:Congrats getting it picked to control, that's some serious skill right there. No pics of the pins, wiz? That's just teasing. :mrgreen:

thanks for the kind words..i will add pics of the pins when i make the key...
(looking forward to seeing guts myself)

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Sun Nov 15, 2009 8:12 pm
by ToolyMcgee
Nice job Awol, it can be tough to get one picked to both lines. I know you don't need any help, but I didn't have anything else to with that old clip. Good luck finding a blank, let me know if you find somewhere that has a peaks type.

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Mon Nov 16, 2009 10:27 am
by awol70
ToolyMcgee wrote:Nice job Awol, it can be tough to get one picked to both lines. I know you don't need any help, but I didn't have anything else to with that old clip. Good luck finding a blank, let me know if you find somewhere that has a peaks type.

will do..there is a supplier here in my town,so i should do well on blanks..

Re: KABBA PEAKS MORTICE PICKED...

PostPosted: Mon Nov 16, 2009 10:41 am
by the lockpickkid
If you don't mind me asking, what method did you use to hit the control line? For me it is usually on accident.