S&G Combo Padlock
32 posts
• Page 1 of 3 • 1, 2, 3
I have recently purchased these 2 padlocks. They are w/o combinations. There has to be a way to open these through manipulation of exploiting tolerances. I know there aer over 100,000 possible combinations for these, but perhaps there's a cafe cracker amongst us that can give me some tips or point out where to drill a window to see the wheel pack. Thanks all! <---------SOUR
Re: S&G Combo Padlock
Or try the combination 25-0.
Re: S&G Combo Padlock
They've been set to a true combination apparently. Factory combo doesn't work. I got these for $3 each so this is going to be a pet-project of mine. Im not going to try every possible combo though. That would take forever!
Contributor - Research & Development Kingpin
Posts: 322
Joined: Sun Aug 15, 2010 6:08 pm
Location: Pennsylvania
Re: S&G Combo Padlock
Check out the cutaways that ElbowMacaroni did for me a while back. They are quite spiffy:
viewtopic.php?f=115&t=5404
Ed
viewtopic.php?f=115&t=5404
Ed
Re: S&G Combo Padlock
edsmiley wrote:Check out the cutaways that ElbowMacaroni did for me a while back. They are quite spiffy:
viewtopic.php?f=115&t=5404
Ed
Damn. Those are cool. Thanks for the link!
Re: S&G Combo Padlock
Looking at the cutaways, these may use the Bras Disks, meaning you could try the (clichéd) stethoscope method?
Human beings, who are almost unique in having the ability to learn from the experience of others, are also remarkable for their apparent disinclination to do so.
Douglas Adams
Douglas Adams
Re: S&G Combo Padlock
Nickinator wrote:Looking at the cutaways, these may use the Bras Disks, meaning you could try the (clichéd) stethoscope method?
Ha! Makes me feel like a spy just thinking about it lol. Im going to mess with it alot so all options are on the table. Might even cut one open. Who knows!!!
Re: S&G Combo Padlock
MBI wrote:Or try the combination 25-0.
Yeah that's the default. Not sure where I got 0-0-0-0.
Howdy!
Re: S&G Combo Padlock
ChemicalRobot wrote:MBI wrote:Or try the combination 25-0.
Yeah that's the default. Not sure where I got 0-0-0-0.
Lol. I still tried it. I believe if it was 0-0-0-0 then you would just turn it 4 times until it hit 0, then it would unlock. But alas, it's going to put up more of a fight than that.
Re: S&G Combo Padlock
that lock new retails for about $400 and was at one time GSA rated. Do you have any information on manipulation, or have you ever tried? If not your only other option is a scope hole to the best of my knowledge. If I were you I would make one a cutaway then practice manipulation with it and try to open the other. Would be a fun project and could result in some additional talent.
Re: S&G Combo Padlock
steveslock wrote:that lock new retails for about $400 and was at one time GSA rated. Do you have any information on manipulation, or have you ever tried? If not your only other option is a scope hole to the best of my knowledge. If I were you I would make one a cutaway then practice manipulation with it and try to open the other. Would be a fun project and could result in some additional talent.
It retailed for $400!!! Oh my Gawd! I like your idea. I think I'll drill a hole in it some where and look at the wheel pack. Then I'll turn it into a cutaway and pactice with it. Im also going to buy an OEM change key. So that would be cool to have especially with a cutaway. Thank you very much everyone! You have given me some great ideas.
Re: S&G Combo Padlock
steveslock wrote:that lock new retails for about $400 and was at one time GSA rated. Do you have any information on manipulation, or have you ever tried? If not your only other option is a scope hole to the best of my knowledge. If I were you I would make one a cutaway then practice manipulation with it and try to open the other. Would be a fun project and could result in some additional talent.
It retailed for $400!!! Oh my Gawd! I like your idea. I think I'll drill a hole in it some where and look at the wheel pack. Then I'll turn it into a cutaway and pactice with it. Im also going to buy an OEM change key. So that would be cool to have especially with a cutaway. Thank you very much everyone! You have given me some great ideas.
Contributor / I Fought Tooth and Nail to Acquire BO...
Posts: 991
Joined: Sat Jan 22, 2011 9:38 pm
Location: MD, USA
Re: S&G Combo Padlock
The directions say to throw it out if u lose the combo .... Get LBO to make a cutaway!
Nibbler: The poop-eradication is but one aspect of your importance.
Re: S&G Combo Padlock
you can drill out the 4 steel retaining pins and it should just fall apart
keep going dont look back allways achive your goals
and follow your dreams................
and follow your dreams................
32 posts
• Page 1 of 3 • 1, 2, 3
Who is online
Users browsing this forum: No registered users