Codelock CL390
Has anyone installed one?
The issue is that every time I tighten the two mounting(Fixing) bolts, the thumb turn on the inside binds and wont return to the 12 o clock position.
When I loosen the screws enough that the lock functions, the lock does not seem to be securely fitted to the door.
All mounting holes correct location.
Alignment with the spindle and the bolt good.
Have installed and re-installed three times.
When the lock is not installed, it functions great.
The lock is double sided(cylinder and push buttons).
Problem only occurs on the inside lock.
Problem only happens when mounting screws are in and tight.
Quote from instructions:
DO NOT CLOSE THE DOOR UNTIL YOU ARE SURE THAT
THE CODE WORKS. DO NOT over tighten the fixing bolts
as this may cause distortion and lead to poor operation.