Re: My nemesis: S&G 6630
w3: Clear gate indications at 30, 63 and 97. Due to the form of the gate the right one is most probably 97.
w2: On a new scan a very well formed gate at 61, one at 80 and probably one at 50. A general low area (right contact point 12 0/8) around 5-20. From the distances of 61 to the neighboring gates and the form of the gate 61 should be the true gate.
w1: Not much movement. Mostly at 12 0/8. Sometimes up to 12 2/8. At 42.5 and 75 dips down to 11 7/8. The distance of the dips is exactly as it should be on this wheel, but measurements are not very precise. The dips might be there by chance.
Should I take one of the dips at w1 and look at w2? Or should I look at w1 with w2 at the low area around 5-20?
Martin Hewitt, Investigator Chronicles of Martin Hewitt