Tue Nov 30, 2010 3:58 am
american series 50 gutted
hay guys i sent one of my home brew picks to LSA and he sent me a old american series 50 padlock
enjoy
1: unlock padlock.
2: remove retaing screw from under the shackle.
3: with the face of the lock faceing you tap the left side with a rubber mallet or simmalar to move the retaing pin out of the plug.
4: remove the plug from the lock this one has 10 wafers.
5: remove the cam from under the plug.
6: remove the 2 stainless steel ball bearings.
7: remove the shackle it should just pull out.
8: pull out the spring from under the shackle.
9: now you have completly gutted your lock.
10: this is the guts out of my one
now you have the choice to make a key if you dont have one or clean it that is what i did and it is working like a dream
hope this helps sombody thanks
Bezza
enjoy
1: unlock padlock.
2: remove retaing screw from under the shackle.
3: with the face of the lock faceing you tap the left side with a rubber mallet or simmalar to move the retaing pin out of the plug.
4: remove the plug from the lock this one has 10 wafers.
5: remove the cam from under the plug.
6: remove the 2 stainless steel ball bearings.
7: remove the shackle it should just pull out.
8: pull out the spring from under the shackle.
9: now you have completly gutted your lock.
10: this is the guts out of my one
now you have the choice to make a key if you dont have one or clean it that is what i did and it is working like a dream
hope this helps sombody thanks
Bezza
You do not have the required permissions to view the files attached to this post.
Last edited by bezza1 on Tue Nov 30, 2010 6:35 pm, edited 1 time in total.
keep going dont look back allways achive your goals
and follow your dreams................
and follow your dreams................
