Comb Picks
If I'm getting this right... the pick pushes all the driver pins past the shear line leaving ALL the pins and springs in the bible, allowing the plug to turn?
The teeth on the picks must have to be exactly the same length as the holes in the plug otherwise the pins wouldn't make it past the shear line or the teeth poking through would not allow the plug to turn?
And considering there are only three picks in the set from uklockpickers (one is for six pins)... that would mean most/all pin tumbler locks are generic in size? I would have thought each lock manufacturer would have there own sizes?
Am I getting any of this right / add anything relevant?
Cheers!