Thu May 22, 2014 5:20 pm by UnlockD
In the post I'll be explaining how to reset and change the combination of a LaGard 33e, without the original/existing combination. A few years ago I was contacted by a manager of a restaurant I used to work at. They had an ATM but no codes and the owner died. They wanted to confirm there was no cash in it so they asked me to take a look. Long story short a Safe & Vault Tech from the UK I had been speaking to for a while told me how to crack it open like a walnut. Anyhow, I was left with what I thought was a useless electronic safe lock until he told me how to reset and change the combination. Well he shared his knowledge with me and I'd like to do the same with this amazing forum and show anyone who owns one of these (without the combo) how to do it.
This is how.
1. Disconnect the battery and remove the sticker by cutting or peeling to expose the board.
2. Insert a jumper into the two holes as seen in the picture. I used a paper clip as my jumper.
3. Reconnect the battery and press 5 within 5 seconds.
4. Disconnect the battery and remove the jumper.
5. Plug the battery back in and enter the code '555555' then '000000' and then '555555.'
6. You're now ready to enter in the 6 digit code of your choice. Enter your code, 123456 as an example, twice.
You're now back in control of this lock.
You do not have the required permissions to view the files attached to this post.