Re: Oldfast's gutted locks
for the life of me i can't see how there is only one shearline visible from the front of the lock though! its very escheresque.
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
GWiens2001 wrote:Ace hardware's locks are pretty decent. Even the rebranded Master/American copies (that are made by Master/American) tend to have more security pins, including serrated key pins on the rebranded Americans.
GWiens2001 wrote:You did not the hot/cold water trick to pop out the brass plugs?
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
tumbl3r wrote:Hey Oldfast,
Just wanted to say thanks! Your tip about tension on the Metroloc was THE thing that allowed me to get into mine! Unless I was checking to see if I had an unset pin, all I had to do was SHOW it the
I have learned so much from what you have written! Thanks again man!
Return to Your Lock Collections
Users browsing this forum: No registered users