Page 1 of 1
question on the brinks schrouded.
Posted:
Sun May 25, 2008 12:32 amby 93940joe
it looks like it could be rekeyable/ic core? Yes or no?
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 4:09 amby Site Admin
i'm not really sure to be honest, it looks like it can but i wouldnt have a clue how to get it apart without breaking it, i'd imagine someone on here would know.
Lew
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 4:54 amby safety0ff
You have drill/remove the pin on the side of the lock to rekey it, there was some information on that on lp101 but I haven't found it in a while (I was looking for it a one point.)
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 3:31 pmby Josh
yeah there is no getting it out nde...
here is a breakdown of the lock originally posted by mrdan on ezp
http://rapidshare.com/files/75489878/Br ... k-down.pdf
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 7:19 pmby safety0ff
No wonders I couldn't find it on lp101 if it was on ezp.
Thanks!
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 8:33 pmby m0ose
Very awesome info! I haven't read it all, but if I were to drill it out, how would I go about re-filling the drilled part?
Re: question on the brinks schrouded.
Posted:
Sun May 25, 2008 10:17 pmby Josh
thats a very good question. It would depend on the resources at your disposal. if you have a micro welder id use that. if not you may be able to use the ever useful duct tape.lol
or metal tape might do....