Page 1 of 1
Longest key blank found on the usual key ring
Posted:
Sat Oct 23, 2021 4:32 amby pickmonger2
In the universe of common key blanks found at locksmith shops what are some of the longest keys (bow and blade) available.
I suspect its probably an automotive blank
I am look for a key blank suitable to grind into a several tools and my Schlage blanks are too short.
Re: Longest key blank found on the usual key ring
Posted:
Sat Oct 23, 2021 10:34 amby Riyame
Not sure how common they would be in shops but you can get the long blade Best blanks. They are something like 1/2"? longer than normal 7 pin blanks IIRC.
Re: Longest key blank found on the usual key ring
Posted:
Sat Oct 23, 2021 6:26 pmby pickmonger2
Thank you very much for the suggestion
I asked my local locksmith shop and for some reason the sales clerk said she needed a name of a blank to enter into the computer.
When I called back and mentioned your suggestion the locksmith said sure that would work and will order me 10.
I am going to have a friend grind me some keyring screw drivers and a knife blade or 2.
Re: Longest key blank found on the usual key ring
Posted:
Sat Oct 23, 2021 6:52 pmby mercurial
Check out Silca RV1 and RV4, two very long blanks for the old Rivers system bar locks made in Australia. It won’t be at your local locksmith, but there are some on eBay Australia at the moment.
…Mark
Re: Longest key blank found on the usual key ring
Posted:
Sun Oct 24, 2021 2:40 amby Visitor
I don't think key blank steel will be strong enough for screwdrivers or a nice blade but I'm interested to hear how you get on.
It might be simpler to buy and modify a pocket knife in the style of a Swiss army knife.
Re: Longest key blank found on the usual key ring
Posted:
Sun Oct 24, 2021 8:39 amby pickmonger2
I saw some being sold at a flea market for $20 a piece and decide to try my own.
My buddy is an ultra skilled DIY toolmaker who knows about grinding water cooling hardening annealing and that kind of stuff.
We are getting various other key blanks to try out. Obviously I will get steel and not brass blanks