That slot Cutter SG13W l@@ks back in stock on AliExpress after browsing this morning
"Flat Slotter D712450zb(sg13w)64.6x2.0x9.53mm For Silca Unocode/ Unocode 299/unocode 399/unocode 399 Evo Key Cutting Machine - Locksmith Supplies - AliExpress"
https://m.aliexpress.com/i/100500375814 ... t=Pc2MsiteAnd a surprise the slot cutter for the Chubb Ava
"Flat Slotter SG17(64.6x1.8x9.53x70T)Saw Blade for SILCA DELTA MULTICOPY Key Cutting Machine Locksmith Tools _ - AliExpress Mobile"
https://m.aliexpress.com/item/4000558802053.htmUpdate :
Its important to note the size difference in cutting blades as they are different
IE the Older framon blade is 4.0 mm smaller than the new 64.6mm stated and actual size
I found this out when trying to fit these new blades to the framon ..they do not fit ..As there a few mil too big
So a slight modification is needed to fit .. The new oversized blades to framon 2 machines .
To start mod :
I removed the protective cutter gaurd and old cutting blade fitted and the screw in rod .. or lollypop type handle
Fitted At back Of cutter... so nothing would be damaged .. And to get tool in safely without it snagging on anything.
So I made this modification With a grinding Tool or cut off blade ..you need to remove approximately 2mm depth
off back Wall or the plate ...
To give you that extra bit of width needed for fitting blades.
The job was successful and new oversized blades fit and work on machine
Happy with this mod
And you really would never know it's been modified
But the result is you've now got a better machine with more scope when it comes to fitting new cutting blades in future .
The hpc blitz is fine with this size of new blade after checking so no mods needed...
Ringo