Fantastic!
There's some nice impressioning tools for holding the key... but will run you around $40.
For a long time (
even after purchasing a real one) I used the handle from an auto-tool.
I cannot find where I posted some pics of the tool in its' entirety and the packaging....
but it looks like
this. Ya know the one? It's used for stripping off the seal around
the windshield. A cable runs off the handle and has a little blade at the end.
Anyway, just another option. Think it runs around $20. Upside is it leaves no marks
on the bow. Downside is that the slot will not easily accommodate some thick keys.
Also, change out the phillip screws & replace with one's that use an allen wrench.
Can't wait to see more!