Page 1 of 1

Poor man's pinning tray

PostPosted: Sat Aug 29, 2015 10:30 pm
by just1pick+open
I hope you guys get the idea from the limited pics that I have here. I just had this idea one day to try using some scrap wood to make a pinning tray, here are the results.
20150829_224308.jpg

Sorry it's dirty I use it alot. Dimensions of mine are ....7 3/4 x 9 3/4
20150829_224308.jpg

Made from scrap from home depot, 2 types of screen stock..the flat and the fluted and a piece of 1"x8" or plywood works also

Re: Poor man's pinning tray

PostPosted: Sun Aug 30, 2015 4:11 pm
by Papa Gleb
Look pretty good and plenty of space in the middle. Would be a very useful board when you need to swap some pins etc.

Re: Poor man's pinning tray

PostPosted: Sun Aug 30, 2015 6:45 pm
by just1pick+open
It's not a beauty but very effective ...thanks for checking it out :mrgreen: