.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Posted: **Thu Aug 23, 2012 4:11 pm**

10ringo10 if you have a spare piece of steel and a template , could you be persuaded to post them to me , ahem , will trade !

Posted: **Thu Aug 23, 2012 5:19 pm**

pry bar 010.JPG

This is it,im surprised how much control you have with this bar...only had one steel bar nozza and i went with mechs sizes or close to it as i could from the vid.....no template. :mrgreen:

Posted: **Thu Aug 23, 2012 5:26 pm**

Ya $26.00CAD for (2) is a little out of my budget. I'll wait a few weeks and see what happens.

Posted: **Thu Aug 23, 2012 5:32 pm**

i agree but they are probably worth it in the long run ...very nice little tool.

Posted: **Thu Aug 23, 2012 5:34 pm**

10ringo10 , is 1.1 mm the thickness ? will hunt out that gauge and " CONSTRUCT A MIGHTY WEAPON"

Posted: **Thu Aug 23, 2012 5:39 pm**

well the three sizes were 1mm x 1.2 x 1.27 thickness or gauge.

.:: Keypicking :: Anything And Everything For Locksmiths, Hobbyist Lock Pickers, Locksport, Lock Picking, lockpicks, cutaways and Security. Simply The Best Lockpicking Forum Around!

Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'

Re: Reviewing Technical Entry's 'Sensitive Pry-bar's'