Thu Feb 12, 2015 7:03 pm by twenglish 1
I actually have that very lock on my ebay watch list, and with my one american, the one with two standard drivers and 3 spool drivers, i have noticed that if i set the two standard pins first, the very deep false set becomes a problem, it makes it very hard to set the spools because the 5200 has no spring tension on the plug and i release all tension and the spool pins wont move that last little bit to set, i managed to get it a few times by setting both standards but i had to twist my pick to get the core to rotate back enough to set the spools, i can pick this lock in under a minute if i pick the binding standard pin, then the spools and end with the final standard pin, now i realize this wont always be an option but it has worked many times on this lock