Yale Interchangeable Core Help
4 posts
• Page 1 of 1
Re: Yale Interchangeable Core Help
Maybe this helps? The first post at least. I believe only the seventh pin at the very back must be lifted while turning the plug to move the locking pawl.
http://keypicking.com/viewtopic.php?f=95&t=9331&p=84654
http://keypicking.com/viewtopic.php?f=95&t=9331&p=84654
Re: Yale Interchangeable Core Help
flywheel wrote:Maybe this helps? The first post at least. I believe only the seventh pin at the very back must be lifted while turning the plug to move the locking pawl.
http://keypicking.com/viewtopic.php?f=95&t=9331&p=84654
Thanks, this helps. I'll have to monkey around with it tomorrow.
Re: Yale Interchangeable Core Help
1) Picked to operating
2) Turned core back until almost locked
3) lifted control pin and turn clockwise to Control. This works because the last pin has a much smaller diameter than the standard key pins.
The plug has a notch on it which corresponds to the rotating disk (control lug)
Note the smaller diameter of the control pin
2) Turned core back until almost locked
3) lifted control pin and turn clockwise to Control. This works because the last pin has a much smaller diameter than the standard key pins.
The plug has a notch on it which corresponds to the rotating disk (control lug)
Note the smaller diameter of the control pin
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users