Impressioned my first lock
the lock is a cheap 5pin taymor (kw1 key) unfortunately I am fresh out of kw1 key blanks so I used an ar1
it took me aboout 20 minutes
I used a black marker and at times found it very hard to see the marks because just pushing the key in scraped off a lot of marker so I started putting just a little turning pressure on the key well inserting it and this put a line down one side of the key and I could see the pin marks clearly on the other side.
I used an oval file from a cheap set of needle files made in china that I found in my toolkit no idea where they came from.
Thanks for the great resource this forum has been.