Lauren's Antique Padlock Restoration
thats some very impressive work Lauren, thanks for always sharing it with us. gotta say, im a tiny bit jealous of the tools you have access to. what is it you do exactly?
Tiger got to hunt, bird got to fly; Man got to sit and wonder, 'Why, why, why?' Tiger got to sleep, bird got to land; Man got to tell himself he understand.
Re: Lauren's Antique Padlock Restoration
Brilliant Job - as usual.
Question re: the decoder for the 6 lever lock.
Does it work like a circular lock decoder (ie a Peanut) or do you have to pick the lock with it?
If the second, I'd love to know how that is done on these locks (how do you get feedback).
Is there a post somewhere that you could point me to?
Thanks for sharing your inspiring work.
Cheers.
Question re: the decoder for the 6 lever lock.
Does it work like a circular lock decoder (ie a Peanut) or do you have to pick the lock with it?
If the second, I'd love to know how that is done on these locks (how do you get feedback).
Is there a post somewhere that you could point me to?
Thanks for sharing your inspiring work.
Cheers.
Clark's Law (Arthur C)
For every expert there is an equal and opposite expert.
For every expert there is an equal and opposite expert.
Re: Lauren's Antique Padlock Restoration
The initial concept of the decoder came from the Dix Pix on David H's site (antique padlocks.com). I never used the Dix Pix, but I knew one day I would make my own version. It was just a question of finding the right materials, particularly the material to hold the needles in place. I use vinyl. This tool should never be sold as an Ace pick. It won't work like that. The locks need to be decoded using a mini caliper (a carefully made L-wire). Sometimes, certain locks can be picked open using hasp tension. Anyway, the decoding info. is used to set set the depth of each needle. I use the end of a dial caliper. I have one caliper used just for this application. I had to grind the end of the caliper to the width of one lever tumbler (or one needle). Once the lock is open, I take an impression of the staggered lever tumblers using my decoder and I tighten the set screws. I use the other end of the tool to extended the image of the levers. When a key is cut correctly the key will fit perfectly into the opposite end of the tool. My initial prototype of my decoder worked wonderfully on all Miller type padlocks until I encounter one with an extra thin key way. I had to grind the sides of the needles to accommodate the padlock. I an now satisfied the my tool will continue to do the job that I designed it to do. I can make one of these tools for anyone who wants one. Today's asking price is $35.00 plus S & H.
Someone stated that he/she like the tools that I have access to. What- a Home Depot drill press and a Harbor Freight slide vise? My strongest tool is my brain. Locksmiths love to pick brains.
Someone stated that he/she like the tools that I have access to. What- a Home Depot drill press and a Harbor Freight slide vise? My strongest tool is my brain. Locksmiths love to pick brains.
Re: Lauren's Antique Padlock Restoration
Aha, the pick must be named for Bob Dix!
femurat: They're called restricted for a reason...
Innerpicked: The more keys you carry, the more important you look
GWiens2001: Great video! Learned a lot about what fun can be had with a forklift and a chainsaw.
pmaxey83: but i first have to submit the proper forms for a new hobby to my wife
Innerpicked: The more keys you carry, the more important you look
GWiens2001: Great video! Learned a lot about what fun can be had with a forklift and a chainsaw.
pmaxey83: but i first have to submit the proper forms for a new hobby to my wife
Re: Lauren's Antique Padlock Restoration
I've been working extensively on making replacement keys for higher security 6 lever antique padlocks. I just got done tooling an Eagle 6 lever lock, and now I'm working on attacking a "New Champion 6 Lever" padlock. So far, the results are wonderful on the New Champion lock. My technique seems to be working well. I don't pick these locks, I decode them. I can't wait for the finished key. Hopefully, my newest lock isn't seized up inside. Don't confuse this lock with the push key style. This lock is a swing lever design.
Re: Lauren's Antique Padlock Restoration
A tip of the hat to a job very well done!
Gordon
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
Re: Lauren's Antique Padlock Restoration
Well done indeed. Always appreciate you sharing some of your latest projects!
Much of what you do is beyond me at this point... all the more reason I enjoy it.
Much of what you do is beyond me at this point... all the more reason I enjoy it.
" Enjoy the journey AS MUCH as the destination."
Re: Lauren's Antique Padlock Restoration
"A COOL WAY...TO DISPLAY...YOUR FAVORITE PADLOCKS"
I modified these collecting card cases to display some of my antique padlocks, http://www.ultrapro.com/product_info.ph ... cts_id=652. I lined the back of the case with sticky back felt (available at craft stores, such as "MICHAELS"). I initially used a transparent mini hook from 3M, COMMAND BRAND. But I later used the small hooks for hanging balloons made by the same company. This approach, combined with fishing line, enabled me to accommodate varying hasp sizes. These locks (shown below) are actually free hanging in the cases. The average cost per display is about $I.60. later I plan to build an oak base to support these individual cases. This approach will allow me to make the base any length I want. I can even do multi-stacked bases.
I modified these collecting card cases to display some of my antique padlocks, http://www.ultrapro.com/product_info.ph ... cts_id=652. I lined the back of the case with sticky back felt (available at craft stores, such as "MICHAELS"). I initially used a transparent mini hook from 3M, COMMAND BRAND. But I later used the small hooks for hanging balloons made by the same company. This approach, combined with fishing line, enabled me to accommodate varying hasp sizes. These locks (shown below) are actually free hanging in the cases. The average cost per display is about $I.60. later I plan to build an oak base to support these individual cases. This approach will allow me to make the base any length I want. I can even do multi-stacked bases.
Re: Lauren's Antique Padlock Restoration
Those are great display cases. The price is perfect, too.
Gordon
Gordon
Just when you think you've learned it all, that is when you find you haven't learned anything yet.
Re: Lauren's Antique Padlock Restoration
Gotta love those boxes great idea.
"Those who believe in telekinetics, raise my hand."
Kurt Vonnegut
Kurt Vonnegut
Re: Lauren's Antique Padlock Restoration
I wonder if that Arco padlock derived from the arco rifken company that makes the locking bank bags?
Re: Lauren's Antique Padlock Restoration
jones wrote:I wonder if that Arco padlock derived from the arco rifken company that makes the locking bank bags?
"ARCO" was not a company name based on the research I did. The name describes shape if anything.
Re: Lauren's Antique Padlock Restoration
Very cool idea! My older locks are simply hanging from screws on the wall.
femurat: They're called restricted for a reason...
Innerpicked: The more keys you carry, the more important you look
GWiens2001: Great video! Learned a lot about what fun can be had with a forklift and a chainsaw.
pmaxey83: but i first have to submit the proper forms for a new hobby to my wife
Innerpicked: The more keys you carry, the more important you look
GWiens2001: Great video! Learned a lot about what fun can be had with a forklift and a chainsaw.
pmaxey83: but i first have to submit the proper forms for a new hobby to my wife
Re: Lauren's Antique Padlock Restoration
"Someone stated that he/she like the tools that I have access to. What- a Home Depot drill press and a Harbor Freight slide vise? My strongest tool is my brain. Locksmiths love to pick brains."
Exactly! Give me a $10,000 lathe and a matching mill and I will build just about anything. The true art and what you do so well, is to improvise with minimal equipment.
Exactly! Give me a $10,000 lathe and a matching mill and I will build just about anything. The true art and what you do so well, is to improvise with minimal equipment.
Return to This Old (or unusual) Lock
Who is online
Users browsing this forum: No registered users