The Battle of the Prybars: Peterson vs Technical Entry
58 posts
• Page 3 of 4 • 1, 2, 3, 4
Just got my Lite Peterson Prybar in the mail today, along with a Peterson Lifter and off diamond. So far...I LOVE THEM!
Re: The Battle of the Prybars: Peterson vs Technical Entry
Dark red plastic handles... interesting.
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1
(ノಠ益ಠ)ノ彡┻━┻
░░░░░░░░░░░░░
Re: The Battle of the Prybars: Peterson vs Technical Entry
i believe the red handled petersons are the "DCAP" deep cut access picks. blue handles are slim and black are the standards
Re: The Battle of the Prybars: Peterson vs Technical Entry
stealthski wrote:i believe the red handled petersons are the "DCAP" deep cut access picks. blue handles are slim and black are the standards
+1 on that.
I've really grown fond of my DCAPs. Nice and strong. However, as you can see from the pic above, the shaft is shorter than the regular Petersons. I guess that's the trade-off between slimmer shaft vs strong pick.
__________________________
MrAnybody's Locks
DISCLAIMER: Reader may posit an understanding of what was written, while this may not coincide with the intended meaning of what is read. Use of brain is required. No purchase necessary. One size fits all, and may contain traces of gibberish.
Re: The Battle of the Prybars: Peterson vs Technical Entry
Yep the DCAPs are excellent. The DCAP diamond is an extremely useful tool for wild keyways and picking side pins like ASSA Twin. The DCAP hook (not the notched lifter) is also superb for ASSA Twin sidepins. The notched lifter pick absolutely destroys Medecos. It lets you rotate like a dream.
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1
(ノಠ益ಠ)ノ彡┻━┻
░░░░░░░░░░░░░
Re: The Battle of the Prybars: Peterson vs Technical Entry
Which online retailers carry either the TE och Petersons prybars and caters to hobbyists/non-locksmiths? I've seen the Petersons at the toool.us shop, but that's about it.
Re: The Battle of the Prybars: Peterson vs Technical Entry
80553 wrote:Which online retailers carry either the TE och Petersons prybars and caters to hobbyists/non-locksmiths? I've seen the Petersons at the toool.us shop, but that's about it.
http://www.technicalentry.com/products/prybar - TE
http://www.lockpickshop.com/PPB.html - PP
Tiger got to hunt, bird got to fly; Man got to sit and wonder, 'Why, why, why?' Tiger got to sleep, bird got to land; Man got to tell himself he understand.
Re: The Battle of the Prybars: Peterson vs Technical Entry
technicalentry.com states "Please note: we only supply our lock entry tools and systems to locksmiths, safe technicians and other security professionals".
Re: The Battle of the Prybars: Peterson vs Technical Entry
80553 wrote:technicalentry.com states "Please note: we only supply our lock entry tools and systems to locksmiths, safe technicians and other security professionals".
No worries with that. They're fine with the locksport community. It's just there for show ...... unless of course everything has changed.
But saying that, I'd say go with Petersons, only because I know a couple of people that have had troubles with their TE orders and a complete lack of communication to clear it up. I really hope they've now cleaned up their customer service now. Petersons on the other hand are spot on. You can pick up the phone and speak to the CEO any time you like.
__________________________
MrAnybody's Locks
DISCLAIMER: Reader may posit an understanding of what was written, while this may not coincide with the intended meaning of what is read. Use of brain is required. No purchase necessary. One size fits all, and may contain traces of gibberish.
Re: The Battle of the Prybars: Peterson vs Technical Entry
MrAnybody wrote:80553 wrote:technicalentry.com states "Please note: we only supply our lock entry tools and systems to locksmiths, safe technicians and other security professionals".
No worries with that. They're fine with the locksport community. It's just there for show ...... unless of course everything has changed.
But saying that, I'd say go with Petersons, only because I know a couple of people that have had troubles with their TE orders and a complete lack of communication to clear it up. I really hope they've now cleaned up their customer service now. Petersons on the other hand are spot on. You can pick up the phone and speak to the CEO any time you like.
I also bought mine from TE without any trouble. No idea how it goes when that happens. But hat's just my own experience, just thought I'd chme in
Go ahead, keep plugging away, picking on me! You will end up on bypass or with rigor mortise.
- GWiens2001
- GWiens2001
OldddffAASSTT the Spin Master Extraordinaire and American Lock Slayer
Posts: 4412
Joined: Thu Mar 31, 2011 9:16 am
Location: Michigan
Re: The Battle of the Prybars: Peterson vs Technical Entry
In regards to the TE set rusting: I recently sanded one down (taking care not to lose thickness off the working ends),
then gave it two coats of Perma Blue. I like the looks of it & should prevent rust. We'll see how it holds up over time.
MBI has mentioned using a cold blue on picks & has some good tips on using it. Can't find where he posted though.
Question: I've two sets of Peterson prybars. I'd like to take one pair of them and place a 30ish degree bend in the middle.
I've no doubt the TE set would snap in two, and I've a sneaking suspicion Petersons will react the same way. Thoughts?
[EDIT] Xeo, didn't I see you snap a prybar once?
then gave it two coats of Perma Blue. I like the looks of it & should prevent rust. We'll see how it holds up over time.
MBI has mentioned using a cold blue on picks & has some good tips on using it. Can't find where he posted though.
Question: I've two sets of Peterson prybars. I'd like to take one pair of them and place a 30ish degree bend in the middle.
I've no doubt the TE set would snap in two, and I've a sneaking suspicion Petersons will react the same way. Thoughts?
[EDIT] Xeo, didn't I see you snap a prybar once?
" Enjoy the journey AS MUCH as the destination."
Re: The Battle of the Prybars: Peterson vs Technical Entry
Oldfast wrote:Question: I've two sets of Peterson prybars. I'd like to take one pair of them and place a 30ish degree bend in the middle.
I've no doubt the TE set would snap in two, and I've a sneaking suspicion Petersons will react the same way. Thoughts?
Heat. Turn it orange, bend it, quench it. The metal composition may not respond to quenching, but it is easy to do regardless. Some might say temper it, but we're not exactly putting metal snapping strain on it during normal use. I haven't had any problems after putting a 90 degree bend on both sides of a pry bar I own.
Let me add I've been working with music wire lately and the stuff is awesome!
Re: The Battle of the Prybars: Peterson vs Technical Entry
Oldfast wrote:[EDIT] Xeo, didn't I see you snap a prybar once?
LOL I most certainly have! So the coating on the TE bars is what is causing the rusting/fading from skin oil?
You do not have the required permissions to view the files attached to this post.
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1
(ノಠ益ಠ)ノ彡┻━┻
░░░░░░░░░░░░░
Re: The Battle of the Prybars: Peterson vs Technical Entry
Xeo, have you tried the Sparrow Flat Tension bar's? I just got a set in the mail today and was wondering how they compare to the TE's and Peterson's.
(17:44:28) HAL 9000 Sez: LockSport is full of children who throw fits because low priced low security products sold in discount department stores do not meet their arbitrary expectations.
Re: The Battle of the Prybars: Peterson vs Technical Entry
Anarchy_won wrote:Xeo, have you tried the Sparrow Flat Tension bar's? I just got a set in the mail today and was wondering how they compare to the TE's and Peterson's.
I have, they are horrible in my opinion. Way too flexible. Barely any feedback.
The code is hidden in the tumblers. One position opens the lock, another position opens one of these doors...
http://www.youtube.com/xeotech1
(ノಠ益ಠ)ノ彡┻━┻
░░░░░░░░░░░░░
58 posts
• Page 3 of 4 • 1, 2, 3, 4
Who is online
Users browsing this forum: No registered users